PRODUCTS
RTD-15.1
RTD-15.1 Full height rotor turnstile for indoor and outdoor applications
operating voltage
passage directions
persons/min
temperature range
“lock-chamber” mode
protection rating
power consumption
motor drive
mechanical unlocking
RTD-15 turnstiles are designed for complete overlap of passage zone and can be used both indoors and outdoors.
Main features
Delivery set
- turnstile with built-in electronics
- RC-panel
- protective canopy (optional)
- foundation frame (optional)
This series of turnstiles can be used both inside buildings and as part of perimeter security systems.
Corrosion resistance and increased rigidity of the welded aluminum structure provide vandal-proof characteristics, high reliability, and long-term outdoor use.
To simplify and improve the installation quality, the RF01 foundation frame is provided. The additional foundation frame allows installing the turnstile even on unstable ground.
The turnstile is equipped with built-in LED passage permission and denial indicators. Additional outputs for connecting remote indicators are provided.
The RTD-15 series turnstile can operate as a stand-alone unit from RC-panel or WRC or as a part of an access control system (ACS). The turnstile operation modes are controlled independently for each passage direction.
Description
The turnstile also features:
- walkway downlights for each passage zone, LED indicators built into the top channel
- blocking of the reverse rotation when turning the rotor at more than 60° angle
- automatic unblocking of the rotors by the Fire Alarm emergency signal
The turnstiles can operate in two operation modes: pulse and potential. Galvanic decoupling of the turnstile outputs from an ACS controller is provided.
The low power consumption for the turnstile allows using a safety voltage.
The turnstile can also be completed with a full height gate with electromechanical lock and railing systems, produced in the same design.
The canopy protects the turnstile against precipitation and climbing over the turnstile. The canopy and the turnstile form a single construction.
Several RTD-15 turnstiles with canopies can be mounted in one row. Special couplings have been designed to provide reliable joining of two or more canopies. This design also allows laying cable through all the top channels of the turnstiles, which considerably simplifies the installation.
Characteristics
| Operating voltage | 22-30 V DC |
| Power consumption | 105 W |
| Consumption current | 4.5 A |
| Number of passage directions | 2 |
| Throughput rate (in the single passage mode) | 20 persons/min |
| Throughput rate (in the free passage mode) | 30 persons/min |
| Dimensions (length×width×height) | 1600×1800×2325 mm |
| Passageway width | 655 mm | Operating temperature range | from -40 °C to +55 °C |
| IP Code | IP55 |
Download
- Manual—-RTD-15 Assembly & Operation Manual —- 20.09.2022 —- 2.87 MB Download
More Information
* For more details about this product, Please
Click Here