PRODUCTS
ST-01
ST-01 Speed gate
ST-01 Speed gate with swing panels is designed for sites with increased requirements for design and convenience.
Main features
Delivery set:
- two posts with built-in electronics
- two top covers
- two swing panels made of tempered glass
- central section with built-in electronics and two swing panels (optional)
- RC-panel
Description
Delivery set:
- two posts with built-in electronics
- two top covers
- two swing panels made of tempered glass
- central section with built-in electronics and two swing panels (optional)
- RC-panel
The stainless steel design simplifies the installation of additional equipment and increases the durability of the top covers. The turnstile design combines style and easy integration of additional equipment.
Swing panels types:
| Passageway width | Barrier height |
| 650 mm | 1300 mm |
| 650 mm | 915 mm |
| 900 mm | 915 mm |
| 1000 mm | 915 mm |
| 1200 mm | 915 mm |
The increased passage width allows organizing an additional emergency exit and access for people with reduced mobility. When passing, the turnstile swing panels open.
It is possible to install the STD-01 central section to increase the number of passage zones. Each central section allows organizing an extra passage zone.
The tracking system is equipped with two levels of infrared sensors with 14 pairs located on the upper level and the other 28 on the lower level of the turnstile, which guarantees safety, high throughput, and prevents tailgating.
The passage direction indicators are located on the front ends of the turnstile posts. The turnstile state indicators (open/closed) are located on the post top covers.
It is possible to install readers under the post top covers. Sliding panels unlock upon receiving an emergency signal or in case of a power loss.
The turnstile can be a part of an ACS as an operating device or a standalone unit controlled by RC-panel or WRC. The RC-panel is included in the standard delivery set.
The stainless steel design simplifies the installation of additional equipment and increases the durability of the top covers. The turnstile design combines style and easy integration of additional equipment.Swing panels types:
| Passageway width | Barrier height |
| 650 mm | 1300 mm |
| 650 mm | 915 mm |
| 900 mm | 915 mm |
| 1000 mm | 915 mm |
| 1200 mm | 915 mm |
It is possible to install the STD-01 central section to increase the number of passage zones. Each central section allows organizing an extra passage zone.
The tracking system is equipped with two levels of infrared sensors with 14 pairs located on the upper level and the other 28 on the lower level of the turnstile, which guarantees safety, high throughput, and prevents tailgating.
The passage direction indicators are located on the front ends of the turnstile posts. The turnstile state indicators (open/closed) are located on the post top covers.
It is possible to install readers under the post top covers. Sliding panels unlock upon receiving an emergency signal or in case of a power loss.
The turnstile can be a part of an ACS as an operating device or a standalone unit controlled by RC-panel or WRC. The RC-panel is included in the standard delivery set.
Characteristics
| Operating voltage | 24 V DC |
| Power consumption | 160 W |
| Consumption current | 6.5 A |
| Number of passage directions | 2 |
| Throughput rate (in the single passage mode) | 60 persons/min |
| Passageway width | 650 mm, 900 mm, 1000 mm, 1200 mm | Operating temperature range | from +1 °C to +50 °C |
| IP Code | IP41 |
| Mean time to failure | 5 000 000 passages |
| Required operating range of the readers | min 40 mms |
| Maximum dimensions of installed readers, L×W×H | 155×68×28 mm |
Download
- Manual—- PERCo-ST-01. Technical Specification —- 29.11.2022 —- 2.47 MB Download
